The products listed are offered at a substantial discount. These items are for those with the necessary restoration skills to bring them back to a serviceable state. The merchandise for sale in this category is offered as is. No returns, no refunds, no exchanges.  Here is an opportunity that with a little bit of good ol elbow grease and midnight oil you can make a silk purse out of a sow’s ear.

9 of 9 Items
  • Demilitarized M1 rifle bolts Demilitarized M1 rifle bolts

    10 DEMILITARIZED M1 RIFLE BOLTS

    10 M1 rifle bolts that have been demilitarized by spot welding the firing pin hole. Bolt only, no other parts. Outside of the front end of the firing pin hole being welded, the bolts are in good condition with some recent red surface rust. The spots of...

    $30.00
  • Demilled M1 trigger housings

    4 DEMILLED M1 TRIGGER HOUSINGS

    4 M1 trigger housings that have been demilled by welding the safety and the trigger to the housing. A clever handyman could recover the trigger housing, the safety, and the clip ejector. The trigger is spot welded to the housing however the sear and the...

    $50.00
  • Demilled  M14 bolts Demilled  M14 bolts Demilled  M14 bolts

    4 DEMILLED M14 BOLTS

    4  M14 bolts. One of each maker. TRW, Winchester (66118), Springfield, and Harrington & Richardson. These have been demilitarized by placing a drop of weld over the firing pin hole. Bolts and roller only, no other parts. Bolts are in very good...

    $100.00
  • 5 M14 STOCK FERRULS

    5 M14 STOCK FERRULS

    FIVE FRONT FERRULE'S AND SLING SWIVELS FOR THE M 14 RIFLE. USED, GOOD CONDITION. ALL 10 PARTS ARE STILL ATTACHED TO THE FRONT PORTION OF THE M 14 STOCK

    $20.00
  • Demilled M1 rifle trigger housings

    DEMILLED M1 TRIGGER HOUSINGS

    COMPLETE M1 TRIGGER HOUSING ASSEMBLES.THESE HAVE BEEN RENDERED INOPERABLE BY WELDING THE TRIGGER TO THE HOUSING. ALL PARTS ARE RECOVERABLE!  EXPECT SOME SURFACE RUST.

    $90.00
  • Salvaged M1 rifle trigger mechanisms Salvaged M1 rifle trigger mechanisms Salvaged M1 rifle trigger mechanisms

    M1 DRILL RIFLE TRIGGER MECHANISM

    M1 rifle trigger mechanisms salvaged from drill rifles. All parts are recoverable. Everything is present except the hammer spring, plunger, and housing, a small bead  has been welded on the back of the cocked hammer. Expect some surface rust due to poor...

    $75.00
  • M1 NUTMEG LAMINATE STOCK SETS M1 NUTMEG LAMINATE STOCK SETS

    M1 NUTMEG LAMINATE STOCK SETS

    DISCOUNT M1 NUTMEG LAMINATE M1 RIFLE STOCK SETS. THE SET CONSISTS OF THE BUTT STOCK, FRONT HANDGUARD, AND REAR HANDGUARD. NO METAL COMPONENTS ARE SUPPLIED. THE STOCK SETS OFFERED ARE NEW, THE HEEL OF THE STOCK HAS BEEN MANUFACTURED INCORRECTLY...

    $125.00
9 of 9 Items